no flicker 12v 10w 20w 30w dimmable LED lamp DALI power supply
30000 Piece/Pieces per Month for 12v 30w dali dimmable led driver for mr16
Packaging & Delivery
1pc/white box +30pcs/Standard Export Carton, packing for 12v 30w dali dimmable led driver for mr16
1 - 50
To be negotiated
china supplier no flicker 12v 10w 20w 30w dimmable LED lamp DALI power supply
Output constant voltage
Built-in active PFC function, PF>0.9
Efficiency > 88%
Protections:short circuit/over load/ over current
Cooling by free air convection
IP40 design for indoor installation
Dimming function:Built in DALI interface dimming function conform to DALI Protocol IEC62386
Dimming range from 0.1% to 100%
Strong compatibility, flicker-free dimming
Suitable for LED lighting and moving sign applications
Compliance to worldwide safety regulations for lighting
100~130 / 170-265VAC
Power Factor (Typ.)
PF≥0.92/110V / PF≥0.95/220V
< 0.40mA/110VAC / < 0.50mA/220VAC
Hiccup mode, recovers automatically after fault condition is removed
10~500Hz,2G 10min./1 cycle,period for 60min. each along X,Y,Z axes
1. All parameters NOT specially mentioned are measured at 110V / 220VAC input , rated load
and 25℃of ambient temperature.
2. Tolerance: includes set us tolerance, line regulation and load regulation .
3. The power supply is considered as a component that will be operated in combination with final Equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must be-qualify EMC Directive on the complete installation again
Connect the Dali signal line to the Dali bus of the controller (the Dali Master).
After Dali Master scanning and address assignment, the driver can be successfully dimmed.
Please refer to Diagram 1
Notice:In the market, some DALI controllers has bus-powered functions .If not,please add an extra power supply.(DALI Power).
Any incorrect connecting of signal line and output line would damage the master.